Search results for: '3100m measurer p n 13650 31 std 13650 311'

3101 MEASURER 1 inch Measurer For material 1/8” to 1” diameter +/- 1/2% accuracy Features:Feet and inch counter with reset to zero with turn of knob. Accommodate from

3101 Measurer - 2 inch Measurer for material 3/16” to 2” diameter +/- 1/2% accuracy Features:Feet and inch counter with reset to zero with turn of knob. Accommodate from

Wire Measurer can be used to measure a wide variety of flexible materials like Wire, cable, rope, hose and other materials. The wire measurer accommodates flexible materials from

Stainless Steel Measurer for Small Material Standard Features: Wire Measurer accommodates a wide variety of flexible materials from 1/64” (.4mm) to 7/8” (22mm)

The ReelPower’s 1700 series measurers are designed durable, easy to use, and highly accurate. Spring tension pinch roll design provides constant pressure on the material

Dual wheel, pneumatic tire measuring system with integrated cutting & vac system. Capacity:.8” thru 5.18” diameterFeatures:Dual pneumatic 6” diameter

Measuring systems are offered in a wide range of configurations that include mechanical counters, electronic display counters, and programmable and integrated PLC devices for

The Reelpower Industrial model 1706 measurer is designed to measure heavy and large diameter cable such as wire rope and larger power cable. The pivot arms and springs keep the

Reelpower Industrial  Model 1704 measurer is designed to measure heavy and large diameter material such as Wire Rope and large diameter Cable. The pivot arms and springs keep

HJ/K series mobile reeling and coiling machine is a practical and economical solution for large diameter spooling and coiling applications. The HJ/K can improve the efficiency of

Integral Hydraulic Push Button Cutter Manual Shaftless Feature Electronic Stop to Length Counter Paralleling Guide Box Safety Guards Collapsible Coiler (Steel or

Integral Hydraulic Push Button Cutter Manual Shaftless Feature Electronic Stop to Length Counter Paralleling Guide Box Safety Guards Collapsible Coiler (Steel or

The ReelPower Industrial  Model 1700 material length measurer offers increased accuracy, durability and operator convenience. The ROM 1700 has a measuring head that literally

The ReelPower Industrial 1700 series measurers are designed durable, easy to use, and highly accurate. Spring tension pinch roll design provides constant pressure on the material

Standard FeaturesLT 200 Series 1/64" to 2" Diameter material LT 400 Series 1/8" to 4" Diameter material Adjustable entrance & exit guide rollers - both

Manual Mini-Penthouse - Manually operated Measuring and Coiling System for flexible materials. Inculdes Stand, 1700 Measurer and coiler.   See the detail

Small measuring and Coiling System for flexible materials to include, wire, hose, rope, others.

Reelpower Industrial calibrated and certified linear measurement Testing Cables give you peace of mind and keep your customers happy with a quick and easy way to make sure that

High Speed Measurer - Wire diameter 1/64" to 3/8" capacity

Reelpower Industrial calibrated and certified Linear measurement Testing Cables give you peace of mind and keep your customers happy with a quick and easy way to make sure that

ReelPower Industrial calibrated and certified Linear measurement Testing Cables give you peace of mind and keep your customers happy with a quick and easy way to make sure that

Standard Features: Needing to replace the top wheel on a 3100. The urethane coated top wheel will fit into Reel Power's 3100 Wire Measurer P/N 13675-324

Most Commonly Used on Coilers and Levelwinds

Most Commonly Used on Coilers and Levelwinds

Most Commonly Used on Coilers and Levelwinds

Includes the Following Penthouse Standard Features and Optional Features Available:Standard: 36” Diameter Coil Turntable with Adjustable ID Pins for Coil

Reelpower Industrial calibrated and certified Linear measurement Testing Cables give you peace of mind and keep your customers happy with a quick and easy way to make sure that

ReelPower Industrial calibrated and certified Linear measurement Testing Cables give you peace of mind and keep your customers happy with a quick and easy way to make sure that

Reelpower Industrial calibrated and certified Linear measurement Testing Cables give you peace of mind and keep your customers happy with a quick and easy way to make sure that

The mobile measuring and coiling systems are ideally suited for coiling (or spooling) material from source reels mounted on a reel rack, roller platform or payout cart.

Special heavy duty coiler comes with wide range coiler width varying from 4-30.It is hand operated with crank ID varyiung from 26-31. It is used for synchronizing in line

ReelPower Industrial calibrated and certified Linear measurement Testing Cables give you peace of mind and keep your customers happy with a quick and easy way to make sure that

P/N 14000-42 Our hose reel is designed for lighter weight material such as "tubing, hose and nylon cord or rope". The Manual hand crank is designed for easy winding and is

Optional cutter, can be directly mounted to our 3100 measurers, not recommended for steel wire, steel cable and fine wire. Blade can be remove to be sharpened.

Repair Kit for RT-10 P/N 13650-326 Weight 1 lbs

Repair Kit for RT-20 P/N 13650-327 Weight 1 lbs

Single Reel Loader & Transport Cradle P/N 0212-020 easily loads reel racking or auxiliary payout stands without damaging the wire.

4 Reel Stackable Cradle, p/n 0212-001 is custom designed to fit your application needs and it has cradles which are made to be moved by forklift. It has standard sizes for 5,000lb

Screw Type Reel Jacks RJ2656 p/n 14988 are designed with rugged use in mind. Simply turn the handle and raise the saddle to the desired payoff height. Reelpower suggests that

Screw Type Reel Jacks RJ4696 p/n 14990 are designed with rugged use in mind. Simply turn the handle and raise the saddle to the desired payoff height. Reelpower suggests that

Screw Type Reel Jacks RJ5890 p/n 14985 are designed with rugged use in mind. Simply turn the handle and raise the saddle to the desired payoff height. Reelpower suggests that

Repair Kit for RT-40, p/n 13650-328. Weight 1 lbs.

Replacement extension spring for the 1700 series measurers p/n 13675-149

Replacement extension spring for the 1704 series measurers p/n 100069858

A fairlead tube is designed to improved accuracy when measuring material under 1/2" diameter When not in use, the fairlead rotates 180 degrees to the upright position out of the

Brass ejection nut for Reelpower's RD 5 and RD10 P/N 2102-352

Replacement Fixed caster, 4"x 2" Phenolic, non-marking fits the following Reelpower Industrial machines WKT3, WK3, WKP, Mini Penthouse and Maxi Penthouse equipmentP/N 10925-36

Replacement Floor lock, 4", fits the following Reelpower machines NK4, WKT3, WK3, WKP, Mini Penthouse and Maxi Penthouse equipment. P/N 12250-02  sold as each 

Replacement kit for Hydraulic Handles

Replacement Swivel caster, 4"x 2" Phenolic, non-marking fits the following Reelpower Industrial machines WKT3, WK3, WKP, Mini Penthouse and Maxi Penthouse equipmentP/N 10925-01

Replacement Veeder Root Metric counter for 1700 or 1704 series measurers, for Right Hand Pay Out RHPO, 166946-045

Replacement Veeder Root Metric counter for 1700 or 1704 series measurers, for Left Hand Take up LHTU, 166936-055

Replacement Veeder Root Foot and Inches counter for 1700 or 1704 series measurers, for Left Hand Take up LHTU, 166936-054

Replacement Veeder Root Foot and Inches counter for 1700 or 1704 series measurers, for Right Hand Pay Out RHPO, 166946-044P/N 13700-47

Replacement smooth/plain wheel for 1704 series measurersP/N 0207-169

Replacement knurled wheel for 1704 Series measurers, P/N 100041306.

Replacement Urethane coated wheel for 1700 or 1700SP MeasurerP/N 0207-359

Replacement Urethane wheel for 1704 series measurersP/N 0207-360

Replacement 12 Ton bottle jack with handleP/N 13150-20

Replacement Knurled wheel for 1700 or 1700SP Measurer P/N 100041305

Replacement 6 Ton bottle jack with handle, fits the following Reelpower machines WKT3, WK3, and WKP P/N 13150-31

Replacement 8 Ton bottle jack with handleP/N 13150-01

Step Bushing (cast material) designed to slide over a 1.38" Shaft and aligning with Reel Arbor holes of 2", 2.5", AND 3" OD, generally works with Reelpower WK3, WKT3, WKP and NK

Reel Skate is designed to move fully loaded reels or spools on their flanges. The Reel Skate can handle reel flanges up to 5" wide and weights of 40,000 lbsP/N 0202-200

Manual traverse Swing Arm for mounting a measurer. Replacement Swing Arm fits the following Reelpower machines WKT3 and WK3P/N 0207-919

HSS series Drive Pin 3/8" diameter x 4" long Stainless Steel with Hex nut p/n 1250-773 and 13988-013

1.0" CAM ROLLER WITH HEX SOCKET, normally fits onto WK3, WKT3, NK4 and CRS cable reel standsP/N 10915-23

1.75" CAM ROLLER WITH HEX SOCKETP/N 10915-22

1000MCM CABLE CUTTER WITH FIBERGLASS HANDLES, JAW CAPACITY: 1.9" DIA COPER/ALUMINUM CABLES MODEL: 1132, OVERALL TOOL LENGTH 32" MADE IN THE USA P/N 16397-04

COMUNICATION CABLE CUTTER WITH STEEL HANDLES, JAW CAPACITY: COMM. CABLES UP TO 3" OVERALL DIA. MODEL: 1037, OVERALL TOOL LENGTH 36" MADE IN THE USAP/N 16397-05

600 MCM CABLE CUTTER W/ FIBERGLASS HANDLES, JAW CAPACITY: 600MCM COPPER/ ALUMINUM CABLES (MAX INSULATION DIA. 1.35") MODEL: 1124, OVERALL TOOL LENGTH 21" MADE IN THE USAP/N

The Paralleling guide stand has an overall standard height of 53", with a 16" square bolt down base, which can be securely fastened to the floor and has a maximum 6" opening for

UTILITY CABLE CUTTER W/ STEEL HANDLES, JAW CAPACITY: 350MCM COPPER/500MCM ALUMINUM MODEL: 3015, OVERALL TOOL LENGTH 16" MADE IN THE USA P/N 16397-02

p/n SP-RHMS120, Portable Powered Respooling machine

P/N 14000-43 3/12C, 3.5" wide x 12" inside diameter, Medium Manual Collapsible Coiler for take up with stand and hand crank

P/N 14000-38 3/16C, 3.5" wide x 16" inside diameter, Large Manual Collapsible Coiler for take up with stand and hand crank

P/N 14000-36 3/8C, 3.5" wide x 8" inside diameter, Small Manual Collapsible Coiler for take up with stand and hand crank

Replacement Wheel for the 1700 or 1700SP Measurer, Smooth/plain wheel

Description: Replacement Floor lock, 6", fits the following Reelpower machines STU's  p/n 12250-07  sold as each 

1” OD Drive Pin, the drive pin are made of steel Replacement drive pin for models NK4 and WKT3

Coiler Clamp p/n 11135-35

3/4” OD DRIVE PIN P/N 1080-006 The drive pin are made of steel Replacement drive pin for models NK4 and WKT3

Light Duty Coilers Manual Hand Crank Collapsible coils Shown is Model 3/8c Collapsible Coiler Table-Top Stand Included Standard Models Available • 3/8c- 8” ID x 14” OD

Manual Mobile Coiler with 3100M Measurer p/n 13650-317• 31” Turntable with 4 adjustable pins to hold coil in place. Center pin is for holding reels.• Turntable weight

The Wire Guide will accommodate up to 1.75” Diameter material while maintaining material in the center of the measuring wheel.

SMALL MANUAL TURNTABLE FOR EASY PAYOFF SPECIFICATIONS • 31” turntable will support 250lbs either in reels or coils configuration. • The center of the turntable is 28”.

Aluminum Locking Clamps 1” OD size shafts p/n 100015928* Easy to use aluminum locking clamps are lightweight and are non-marring against the shaft surface Available Clamps

Aluminum Locking Clamps 1.5” OD size shafts p/n 100016051 Easy to use aluminum locking clamps are lightweight and are non-marring against the shaft surface Available Clamps

Stand works in relationship with Reel Power manual coilers and can accomodate any of our 3100 Series Measurers ***NOT TO BE USED WITH 3101 or 3102

Standard Features • The Reel-O-Matic® Model 1700 material length measurer offers increased accuracy, durability and operator convenience. • The ROM 1700 has a measuring head

For Flexible Material 1/8” to 2” Diameter +/- 1/2% Accuracy Standard Features The ReelPower’s 1700 series measurers are designed durable, easy to use, and highly accurate.

The “Mini-Penthouse” is ideally suited for pulling material from reel racks, reel roller platforms or a pay-out cart. Also, ideal for use with an extrusion line when equipped

Penthouse Series Measuring & Coiling Machinery Features • 1700SP Measurer • Optional 6-Arm Coiler • Wind off 36” Diameter Turntable • Floor Lock Includes the

Low Tension No Contact Dancer The Low Tension No Contact Dancer is designed to protect delicate & sensitive product which may be damaged or over stressed by sheaves in other

The Wire Guide will accommodate up to 1.00” diameter material while maintaining material in the center of the measuring wheel.

Save warehouse space, improve internal logistics, and reduce shipping costs and product returns by producing coils of your HDPE, PP, PEX or PE-RT pipe products automatically from

Model WKT3-014 Mobile Shafted take-up machine for reels 20” to 54” diameter x up to 34” wide. Maximum lifting capacity of 3,000 lbs. and pull from a 2,500 lb. supply reel.

Model WKT3-014 Mobile Shafted take-up machine for reels 20” to 54” diameter x up to 34” wide. Maximum lifting capacity of 3,000 lbs. and pull from a 2,500 lb. supply reel.

FT/IN Replacement Tabulator for 3100m P/N 13650-317, 3100m P/N 10001078 with Urethane wheels and the Cordage Measurer P/N 14000-47.

Stainless Steel Measurer for Cordage and Rope

The “Mini-Penthouse” is ideally suited for pulling material from reel racks, reel roller platforms or a pay-out cart. Also, ideal for use with an extrusion line when equipped

Hairpins are used with any of the Mini Penthouse series units.

Accuracy of +/- 1/2 of 1% at speeds up to 2000 FPM• Capacity range of 1/8” OD minimum x up to 1” OD maximum• Heavy steel plate construction with hardened entrance and exit

Includes Mini-Penthouse Standard Features and Options with the Additional Following Features: Integral Cutter for up to 2” Diameter Material Weighted Base for

For flexible material 1/8” to 2” diameter +/- 1/2% accuracy

MODEL 1700 Material Measuring MeterFor Flexible Material 1/8” to 2” Diameter +/- 1/2% Accuracy.

Includes Mini-Penthouse Standard Features and Options with the Additional Following Features: Integral Cutter for up to 2” Diameter Material Weighted Base for

Includes Mini-Penthouse Standard Features and Options with the Additional Following Features: Integral Cutter for up to 2” Diameter Material Weighted Base for

Includes Mini-Penthouse Standard Features and Options with the Additional Following Features: Integral Cutter for up to 2” Diameter Material Weighted Base for

Includes Mini-Penthouse Standard Features and Options with the Additional Following Features: Integral Cutter for up to 2” Diameter Material Weighted Base for

Includes Mini-Penthouse Standard Features and Options with the Additional Following Features: Integral Cutter for up to 2” Diameter Material Weighted Base for

Includes Mini-Penthouse Standard Features and Options with the Additional Following Features: Integral Cutter for up to 2” Diameter Material Weighted Base for

Includes Mini-Penthouse Standard Features and Options with the Additional Following Features: Integral Cutter for up to 2” Diameter Material Weighted Base for

All standard duty turntables come equipped with 12” tall tabletop stands, adjustable ID pins, and a center post

All standard duty turntables come equipped with 12” tall tabletop stands, adjustable ID pins, and a center post

Model WKT3-014 Mobile Shafted take-up machine for reels 20” to 54” diameter x up to 34” wide. Maximum lifting capacity of 3,000 lbs. and pull from a 2,500 lb. supply reel.

Model WKT3-014 Mobile Shafted take-up machine for reels 20” to 54” diameter x up to 34” wide. Maximum lifting capacity of 3,000 lbs. and pull from a 2,500 lb. supply reel.

Model WKT3-014 Mobile Shafted take-up machine for reels 20” to 54” diameter x up to 34” wide. Maximum lifting capacity of 3,000 lbs. and pull from a 2,500 lb. supply reel.

Our repair kits can assist in extending the life of an RT by replacing the most commonly wearable items. Part #13650-329 Includes: Washers, Clevis Pins, Spring Pin, Cotter Pins,

Heavy-Duty Meter Stand With Swing Arm And Weighted Base

Meter encoder standard programmed 100 PPR for 3100M, 1700, 1704, LT200, and LT400 measures. 12030-92 ENCODER, EIL580P-T$U4.5BF.01024.B/MT0204, Pre-Progammed to 100ppr, HTL output

Complete Kit Includes:Wheel Cover Side Shield (Lexan) Mounting Hardware

The replacement cable for machines with electronic predetermined stop to length counter system (ESTL)Includes Connector 35’ Long. Cable Can Be Cut To Length In The

COMPLETE KIT INCLUDES:Wheel Cover Guard Mounting HardwareKIT WILL SERVICE:1700 1700 SP 1700 SL (Side load)

Floor Stand for coilers, turntables, and measurers. Stand works in relationship with Reel Power manual coilers, turntables, and can accommodate any of our 3100 Series Measurers.

Full Guarding & Safety Interlocking DoorsLexan Viewing of Operations 2” Capacity Programmable HMI/PLC Measurer Tension Controlled Payoff Dual Take Up With Automatic

Ideal For Re-Reeving Cranes, Winches, Boom-Hoist, Steel Reel Applications That Require Heavy Duty Payoff Tension And Take-Up Rewind Capabilities With Large, Heavy

Tilt table to handle panels or boxes 36” wide x 84” tall x up to 2,000 lbs. System will be a 120-volt single phase system.

4″ & 6″ Wide Belts with 30″ Traction Lengths NPS-STD Pullers are designed for optimal performance, at an attractive cost, with standard features that are optional on

Servo puller/cutters with standard features that are optional on other brands, providing superior product consistency.

Dimensions L 55” x W 24” x H 52” Base model 100040393 comes with steel wheel measurer Upgrade model 100040400 comes with urethane wheel measurer

Dimensions L 55” x W 24” x H 52” Base model 100040393 comes with steel wheel measurer Upgrade model 100040400 comes with urethane wheel measurer

Standard Combo Paralleling Cable Reel Stand, includes a three compartment model RPR 35 measuring 40” O.D. x 16” I.D. x 32” wide. Includes 2” O.D. shaft with 2 1/8”

Automatic Cut to Length Machine - Developed specifically for measuring and cutting small wire rope, jacketed, or unjacketed. Standard Features:1 HP variable speed 120v single

Our repair kits can assist in extending the life of an RT by replacing the most commonly wearable items.

Metric Replacement Tabulator for 3100m P/N 13650-317, 3100m P/N 10001078 with Urethane wheels and the Cordage Measurer P/N 14000-47.

Reel Power new style counter bracket which is designed to fit on the following measurers the 1700, 1700SP, 1700SL, 1704, 1704SL and 1706

Gantry Style Shaftless Take-up / Tire Drive Gantry Style Shaftless Take-up for reels measuring 60” to 96” OD X 36” to 60” wide X up to 30,000 lbs. maximum weight

SPOOL WINDER: Manual Reel/Spool Take-Up & Pay-Off Features:16” tall and 27” overall in width. The 16” stand can be mounted to work any station Handles up to 16”

Fully Automated Pex Pipe Coiler with Stretch Wrap Features:Accumulator Dancer Comes with Conveying System Master Reel Payoff Automatic Pipe Cutter Speeds up to 650 FPM

NK4, NK5, NK6 MANUAL SHAFTLESS SERIES: Reeling and Coiling Take-Up Machine Features:7.5 to 20 HP Hydraulic Variable Speed Drive System... forward & reverse 4,000 - 6,000

Arbor Bushing MK5 P/N 0100-440 – Set of bushings for 2" shaft x 3" OD arbor hole. Includes hardware.

COILER ADAPTER – For use with WK/HJ 1034-121, Right-Hand or Left-Hand Slide Drive.

Belt P/N 10520-235 for LT200 measurer. Durable urethane construction with reinforced steel cord for strength and long-lasting performance.

REEL RACK TROLLEY 2.00 IN DIAMETER P/N 1499-201

SHAFT COILER ADAPTER PLUG-IN  P/N 1030-006* 

Standard Features: Needing to replace the Bottom wheel on a 3100. The urethane coated Bottom wheel will fit into Reel Power's 3100 Wire Measurer P/N 13675-324

MEASURER CONVERSION KIT 1700 TO 1700SP

Model WKT3-014 Mobile Shafted take-up machine for reels 20” to 54” diameter x up to 34” wide. Maximum lifting capacity of 3,000 lbs. and pull from a 2,500 lb. supply reel.