Search results for: 'replacement parts for mini part hole coiler'

Stainless Steel Measurer for Small Material Standard Features: Wire Measurer accommodates a wide variety of flexible materials from 1/64” (.4mm) to 7/8” (22mm)

The “Mini-Penthouse” is ideally suited for pulling material from reel racks, reel roller platforms or a pay-out cart. Also, ideal for use with an extrusion line when equipped

Includes Mini-Penthouse Standard Features and Options with the Additional Following Features: Integral Cutter for up to 2” Diameter Material Weighted Base for

Includes Mini-Penthouse Standard Features and Options with the Additional Following Features: 36” Diameter CT Coil Turntable with Adjustable ID Pins for Coil Payo and Center

Standard FeaturesCapacity 24” diameter x 12” wide x 150 LBs Dynamic Braking Feature V-Belt Drive Remote Safety Foot Switch Speed Control Potentiometer Illuminated

Reel Capacity: 48” dia. x 32” wide x 2,000 lbs.Portable pay-out stands have five (5) reel loading positions for various sized pay-out reels. The operator uses his/her

Integral Hydraulic Push Button Cutter Manual Shaftless Feature Electronic Stop to Length Counter Paralleling Guide Box Safety Guards Collapsible Coiler (Steel or

Integral Hydraulic Push Button Cutter Manual Shaftless Feature Electronic Stop to Length Counter Paralleling Guide Box Safety Guards Collapsible Coiler (Steel or

1, 2, 3, and 5 HP AC Vector Variable Speed Drive System to maintain line tension and automatically synchronize speed of coiler with speed of process line.

Available in either Aluminum or Steel, Collapsible Coilers are crafted to be used with our shafted and shaft-less machinery. They are easily connected and removed, saving many

Manual Mini-Penthouse - Manually operated Measuring and Coiling System for flexible materials. Inculdes Stand, 1700 Measurer and coiler.   See the detail

Shown Below is our Model SP-CRS108 Powered Cable Reel Stand for reels 108"Dia x 80" wide x 25,000lbs load capacity. This machine was designed for retracting cords in a Marine

Wire Insulation Tester WIT 101 High Speed Re-Spooler: The Wire Insulation Tester (WIT ) is powered by a 1 HP variable speed drive system providing speeds up to 1,000 ft per

The Heavy Duty Coiler is to be used with Coil Steel, Rubber Belting, Sheet Tubing, Heavy Cable and other flexible material applications.  

***PLEASE NOTE requires 4 1/2” - 6" arbor holes*** Allows you to lift and flip your reel over from a rolling to a non-rolling position. The Reel Thing has been laboratory

Standard Features: Needing to replace the top wheel on a 3100. The urethane coated top wheel will fit into Reel Power's 3100 Wire Measurer P/N 13675-324

Most Commonly Used on Coilers and Levelwinds

Most Commonly Used on Coilers and Levelwinds

Most Commonly Used on Coilers and Levelwinds

Coiler Options:3/8 C - Coiler 3.5” Wide X 8” I.D. X 14” O.D.3/12 C - Coiler 3.5” Wide X 12” I.D. X 21” O.D.3/16 C - Coiler 3.5” Wide X

A wide range of coiling equipment is available for winding material onto reels/ spools or onto coils (stretch wrapped or banded). Both on and off-line coilers are

Coiler Options: 3/8 C - Coiler 3.5” Wide X 8” I.D. X 14” O.D. 3/12 C - Coiler 3.5” Wide X 12” I.D. X 21” O.D. 3/16 C - Coiler 3.5”

The DHSC is a complete dual head spooler/coiler designed for continuous production. When one spool is running the operator can be unloading the full spool and loading an empty

The mobile measuring and coiling systems are ideally suited for coiling (or spooling) material from source reels mounted on a reel rack, roller platform or payout cart.

Coilers have been built for tube coils weighing just ounces to rod and metal strip coils weighing 5,000 lbs. They are also built for offline rewind and continuous process

Reelpower Industrial manufactured side plate coiler is outstanding product which features tie off slots, quick release outer flange, tapered inner diameter.

Automatic Rewind Coiler comes out with higher coil production at lower cost, greater production flexibility and increase extrusion speed up to 100% and reduce labor cost up to

Special heavy duty coiler comes with wide range coiler width varying from 4-30.It is hand operated with crank ID varyiung from 26-31. It is used for synchronizing in line

Semiautomatic coilers are a low cost alternative to fully automatic equipment. These coilers wind the product as it emerges from the extrusion line automatically following

Semiautomatic coilers are a low cost alternative to fully automatic equipment. These coilers wind the product as it emerges from the extrusion line automatically following

P/N 14000-42 Our hose reel is designed for lighter weight material such as "tubing, hose and nylon cord or rope". The Manual hand crank is designed for easy winding and is

Screw Type Reel Jacks RJ2656 p/n 14988 are designed with rugged use in mind. Simply turn the handle and raise the saddle to the desired payoff height. Reelpower suggests that

Screw Type Reel Jacks RJ4696 p/n 14990 are designed with rugged use in mind. Simply turn the handle and raise the saddle to the desired payoff height. Reelpower suggests that

Screw Type Reel Jacks RJ5890 p/n 14985 are designed with rugged use in mind. Simply turn the handle and raise the saddle to the desired payoff height. Reelpower suggests that

Replacement extension spring for the 1700 series measurers p/n 13675-149

Replacement extension spring for the 1704 series measurers p/n 100069858

Replacement Fixed caster, 4"x 2" Phenolic, non-marking fits the following Reelpower Industrial machines WKT3, WK3, WKP, Mini Penthouse and Maxi Penthouse equipmentP/N 10925-36

Replacement Floor lock, 4", fits the following Reelpower machines NK4, WKT3, WK3, WKP, Mini Penthouse and Maxi Penthouse equipment. P/N 12250-02  sold as each 

Replacement kit for Hydraulic Handles

Replacement Swivel caster, 4"x 2" Phenolic, non-marking fits the following Reelpower Industrial machines WKT3, WK3, WKP, Mini Penthouse and Maxi Penthouse equipmentP/N 10925-01

Replacement Veeder Root Metric counter for 1700 or 1704 series measurers, for Right Hand Pay Out RHPO, 166946-045

Replacement Veeder Root Metric counter for 1700 or 1704 series measurers, for Left Hand Take up LHTU, 166936-055

Replacement Veeder Root Foot and Inches counter for 1700 or 1704 series measurers, for Left Hand Take up LHTU, 166936-054

Replacement Veeder Root Foot and Inches counter for 1700 or 1704 series measurers, for Right Hand Pay Out RHPO, 166946-044P/N 13700-47

Replacement smooth/plain wheel for 1704 series measurersP/N 0207-169

Replacement knurled wheel for 1704 Series measurers, P/N 100041306.

Replacement Urethane coated wheel for 1700 or 1700SP MeasurerP/N 0207-359

Replacement Urethane wheel for 1704 series measurersP/N 0207-360

Replacement 12 Ton bottle jack with handleP/N 13150-20

Replacement Knurled wheel for 1700 or 1700SP Measurer P/N 100041305

Replacement 6 Ton bottle jack with handle, fits the following Reelpower machines WKT3, WK3, and WKP P/N 13150-31

Replacement 8 Ton bottle jack with handleP/N 13150-01

Step Bushing (cast material) designed to slide over a 1.38" Shaft and aligning with Reel Arbor holes of 2", 2.5", AND 3" OD, generally works with Reelpower WK3, WKT3, WKP and NK

Manual traverse Swing Arm for mounting a measurer. Replacement Swing Arm fits the following Reelpower machines WKT3 and WK3P/N 0207-919

P/N 14000-43 3/12C, 3.5" wide x 12" inside diameter, Medium Manual Collapsible Coiler for take up with stand and hand crank

P/N 14000-38 3/16C, 3.5" wide x 16" inside diameter, Large Manual Collapsible Coiler for take up with stand and hand crank

P/N 14000-36 3/8C, 3.5" wide x 8" inside diameter, Small Manual Collapsible Coiler for take up with stand and hand crank

18” diameter x 2’-12” wide with 1/2” to 2” arbor holes. 150 lbs. maximum weight capacity

Replacement Wheel for the 1700 or 1700SP Measurer, Smooth/plain wheel

Description: Replacement Floor lock, 6", fits the following Reelpower machines STU's  p/n 12250-07  sold as each 

1” OD Drive Pin, the drive pin are made of steel Replacement drive pin for models NK4 and WKT3

Coiler Clamp p/n 11135-35

3/4” OD DRIVE PIN P/N 1080-006 The drive pin are made of steel Replacement drive pin for models NK4 and WKT3

Light Duty Coilers Manual Hand Crank Collapsible coils Shown is Model 3/8c Collapsible Coiler Table-Top Stand Included Standard Models Available • 3/8c- 8” ID x 14” OD

Cutter/Coiler/Binder Cuts Wire to Desired Length Binds Coil in Two Places Custom Tail Lengths for Termination

Automatic CoilerAllen Bradley PLCRed Lion HMIAutomatic FeedAutomatic CutterAutomatic CoilerAutomatic BanderAutomatic Eject

Manual Mobile Coiler with 3100M Measurer p/n 13650-317• 31” Turntable with 4 adjustable pins to hold coil in place. Center pin is for holding reels.• Turntable weight

HD-HSS Hydraulic Automatic Expand/Collapsible (Model- HD-IL-HSS753)3 HP 0-10 RPM 480 3 phase drive, hydraulic assist coiler with speed and tension control Coiler:

Aluminum Locking Clamps 1” OD size shafts p/n 100015928* Easy to use aluminum locking clamps are lightweight and are non-marring against the shaft surface Available Clamps

Aluminum Locking Clamps 1.5” OD size shafts p/n 100016051 Easy to use aluminum locking clamps are lightweight and are non-marring against the shaft surface Available Clamps

Stand works in relationship with Reel Power manual coilers and can accomodate any of our 3100 Series Measurers ***NOT TO BE USED WITH 3101 or 3102

The “Mini-Penthouse” is ideally suited for pulling material from reel racks, reel roller platforms or a pay-out cart. Also, ideal for use with an extrusion line when equipped

Large Reel Dolly (96” Flange x 119” Width) Includes • All steel welded construction. • Extra heavy-duty swivel lockable casters, bearing supported for added

Penthouse Series Measuring & Coiling Machinery Features • 1700SP Measurer • Optional 6-Arm Coiler • Wind off 36” Diameter Turntable • Floor Lock Includes the

Model WKT3-014 Mobile Shafted take-up machine for reels 20” to 54” diameter x up to 34” wide. Maximum lifting capacity of 3,000 lbs. and pull from a 2,500 lb. supply reel.

FT/IN Replacement Tabulator for 3100m P/N 13650-317, 3100m P/N 10001078 with Urethane wheels and the Cordage Measurer P/N 14000-47.

The “Mini-Penthouse” is ideally suited for pulling material from reel racks, reel roller platforms or a pay-out cart. Also, ideal for use with an extrusion line when equipped

Hairpins are used with any of the Mini Penthouse series units.

Includes Mini-Penthouse Standard Features and Options with the Additional Following Features: Integral Cutter for up to 2” Diameter Material Weighted Base for

Custom Pneumatic Powered Expand High-Speed Coiling Machine with custom Coiler 8” x 18.5” x 3.75” wide

MODEL 1700 Material Measuring MeterFor Flexible Material 1/8” to 2” Diameter +/- 1/2% Accuracy.

Includes Mini-Penthouse Standard Features and Options with the Additional Following Features: Integral Cutter for up to 2” Diameter Material Weighted Base for

Includes Mini-Penthouse Standard Features and Options with the Additional Following Features: Integral Cutter for up to 2” Diameter Material Weighted Base for

Includes Mini-Penthouse Standard Features and Options with the Additional Following Features: Integral Cutter for up to 2” Diameter Material Weighted Base for

Includes Mini-Penthouse Standard Features and Options with the Additional Following Features: Integral Cutter for up to 2” Diameter Material Weighted Base for

Includes Mini-Penthouse Standard Features and Options with the Additional Following Features: Integral Cutter for up to 2” Diameter Material Weighted Base for

Includes Mini-Penthouse Standard Features and Options with the Additional Following Features: Integral Cutter for up to 2” Diameter Material Weighted Base for

Includes Mini-Penthouse Standard Features and Options with the Additional Following Features: Integral Cutter for up to 2” Diameter Material Weighted Base for

Our repair kits can assist in extending the life of an RT by replacing the most commonly wearable items. Part #13650-329 Includes: Washers, Clevis Pins, Spring Pin, Cotter Pins,

The Benefits of Reel Power Semi-Automatic Pipe Coiling System: Reduce CostsOnly one operator is required to oversee the operation of two or more machines. Where coiler

Coiler can be removed to function as a small spool take-up. 8” ID X 12” OD Coils:Accommodates spool/ reel with 1/2” arbor holes 10” wide x 12” OD Comes with quick

The replacement cable for machines with electronic predetermined stop to length counter system (ESTL)Includes Connector 35’ Long. Cable Can Be Cut To Length In The

Floor Stand for coilers, turntables, and measurers. Stand works in relationship with Reel Power manual coilers, turntables, and can accommodate any of our 3100 Series Measurers.

For Coiling/ Re-spooling Corrugated Stainless Steel Gas Line Coils, Reels, Bands, Wraps, Ejects, Cuts, & Conveys FEATURES:Programmable recipe management Allen-Bradley

Reel Power Industrial’s custom ARC series single spindle film wrap coiler can be configured to work in-line. Corrugated coil will be film wrapped and auto ejected to customer

Leaders with (PCT) Pipe Coil Technology Innovations Standard Features:Wide range of coil head adjustment Safe and ergonomic operation Automatic pipe layering Automatic

The Micro-Puller/Cutter is currently unavailable.It has been replaced with the NPC-Mini Puller/Cutter. Reel Power has changed the industry standard for medical puller/cutters

Puller Specs:2” Wide x 12” and 20” Long traction belt length Speed Range: 200-750 ft/min Max (see below) Beam side plates anodized aluminum with Stainless Steel

Dimensions L 55” x W 24” x H 52” Base model 100040393 comes with steel wheel measurer Upgrade model 100040400 comes with urethane wheel measurer

Dimensions L 55” x W 24” x H 52” Base model 100040393 comes with steel wheel measurer Upgrade model 100040400 comes with urethane wheel measurer

The Reel Power combo is constructed of all tubular welded steel. Our stands are complete with a 2” diameter solid steel shaft, cam roller bearings that allow for easy reel

Our repair kits can assist in extending the life of an RT by replacing the most commonly wearable items.

Metric Replacement Tabulator for 3100m P/N 13650-317, 3100m P/N 10001078 with Urethane wheels and the Cordage Measurer P/N 14000-47.

Puller Specs:2” Wide x 12” and 20” Long traction belt length Speed Range: 200-725 ft/min Max (see gearbox ratios below) Gear Ratio (see below) Beam side plates

SPOOL WINDER: Manual Reel/Spool Take-Up & Pay-Off Features:16” tall and 27” overall in width. The 16” stand can be mounted to work any station Handles up to 16”

Fully Automated Pex Pipe Coiler with Stretch Wrap Features:Accumulator Dancer Comes with Conveying System Master Reel Payoff Automatic Pipe Cutter Speeds up to 650 FPM

Features:Robust coiler take-up, modified to accommodate up to 5.18” OD hose. Coiling head ID is manually adjustable via hydraulic motor controlled throughout its

Arbor Bushing MK5 P/N 0100-440 – Set of bushings for 2" shaft x 3" OD arbor hole. Includes hardware.

COILER ADAPTER – For use with WK/HJ 1034-121, Right-Hand or Left-Hand Slide Drive.

SHAFT COILER ADAPTER PLUG-IN  P/N 1030-006* 

Standard Features: Needing to replace the Bottom wheel on a 3100. The urethane coated Bottom wheel will fit into Reel Power's 3100 Wire Measurer P/N 13675-324

The NC-5-HD Series Cutter Blade Assortment provides a convenient selection of replacement blades designed for use with NC-5-HD Series Cutters. This kit helps ensure operators have

 Mobility Kit for WKT3, WK3, WKP, Mini Penthouse and Maxi Penthouse.

Lock Handle Assembly with Hardware 0210-1073*

The BAR, WEAR PAD ACT-16-001 is a replacement wear pad bar designed for compatible ReelPower machinery. It provides a sacrificial wear surface to reduce metal-to-metal contact,

Replacement Floor Lock for MMC-001-01