Search results for: '13800 mounting box roller pipe'

Wire Measurer can be used to measure a wide variety of flexible materials like Wire, cable, rope, hose and other materials. The wire measurer accommodates flexible materials from

Stainless Steel Measurer for Small Material Standard Features: Wire Measurer accommodates a wide variety of flexible materials from 1/64” (.4mm) to 7/8” (22mm)

The Reelpower Industrial model 1706 measurer is designed to measure heavy and large diameter cable such as wire rope and larger power cable. The pivot arms and springs keep the

Reelpower Industrial  Model 1704 measurer is designed to measure heavy and large diameter material such as Wire Rope and large diameter Cable. The pivot arms and springs keep

The “Mini-Penthouse” is ideally suited for pulling material from reel racks, reel roller platforms or a pay-out cart. Also, ideal for use with an extrusion line when equipped

The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2” diameter solid steel shaft, cam roller bearings that allow for

Integral Hydraulic Push Button Cutter Manual Shaftless Feature Electronic Stop to Length Counter Paralleling Guide Box Safety Guards Collapsible Coiler (Steel or

Integral Hydraulic Push Button Cutter Manual Shaftless Feature Electronic Stop to Length Counter Paralleling Guide Box Safety Guards Collapsible Coiler (Steel or

Heavy Duty Floor Mounted Shaftless Pay-Outs provide you with increased productivity, reduced processing time and fast, easy supply reel change-outs.

Heavy duty floor mounted shaftless take-ups provide you with improved productivity, reducing processing time.Standard Speed Ranges: 0-35 RPM or 0-70 RPM. Optional Dual

Standard FeaturesLT 200 Series 1/64" to 2" Diameter material LT 400 Series 1/8" to 4" Diameter material Adjustable entrance & exit guide rollers - both

Small measuring and Coiling System for flexible materials to include, wire, hose, rope, others.

Tough Structural Steel Frame and Front Roller Locks to Ease Reel Removal. Side Rollers are included. Low Base Design to Avoid Damaging of Cable Inside Reel. Rugged Steel :Angle"

FMT60 Shaftless Take-Up and Pay-out Machines Heavy Duty Floor mounted shaftless take-ups provide you with improved productivity, reducing processing time.

Reelpower Industrial PRR Series was created for use in extrusion, assembly and inspection processes or where minimum floor space usage is required. The PRR may be easily loaded

Trailer Mounted Re-Reeving Machinery from 5000lb to 100,000lb capacities. Designed and manufactured for your wire rope applications.  

ReelPower Industrial Special Model TUC5 is capable of supporting reels up to 60" O.D. X 48" wide x 5,000 lbs. Includes Multi Level Shaft Supports for various diameter reels,

Custom Adaptors for existing Combo Units for mounting a single compartment paralleling reel. Includes heavy duty drop-in bracket with fixed 2” dia. stub shaft

The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for

The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solidsteel shaft, cam roller bearings that allow for easy

The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for

The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for

The Reelpower WC Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for easy reel

The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for

The Reelpower WC Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for easy reel

The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for

The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for

The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for

The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for

The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for easy

The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for

The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for

The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for

The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for

Tough Structural Steel Frame and Front Roller Locks to Ease Reel Removal. Side Rollers are Included. Low Base Design to Avoid Damaging of Cable Inside Reel. Rugged Steel

Tough Structural Steel Frame and Front Roller Locks to Ease Reel Removal.Side Rollers are Included. Low Base Design to Avoid Damaging of Cable  Inside Reel. Rugged Steel

Tough Structural Steel Frame and Front Roller Locks to Ease Reel Removal. Side Rollers are Included. Low Base Design to Avoid Damaging of Cable Inside Reel. Rugged Steel

Custom Adaptors for existing Combo Units for mounting a single compartment paralleling reel. Includes heavy duty drop-in bracket with fixed 2” dia. stub shaft

Tough Structural Steel Frame and Front Roller Locks to Ease Reel Removal. Side Rollers are Included. Low Base Design to Avoid Damaging of Cable Inside Reel.Rugged Steel

Tough Structural Steel Frame and Front Roller Locks to Ease Reel Removal. Side Rollers are Included. Low Base Design to Avoid Damaging of Cable Inside Reel. Rugged Steel

6” Capacity Guide with Bearing Mounted Rollers

A wide range of coiling equipment is available for winding material onto reels/ spools or onto coils (stretch wrapped or banded). Both on and off-line coilers are

Standard and custom systems are available forapplications in numerous industries from cablemanufacturing to umbilical, hose, tube, and pipe.

The mobile measuring and coiling systems are ideally suited for coiling (or spooling) material from source reels mounted on a reel rack, roller platform or payout cart.

Reel Trailers are designed to support and transport a reel of cable to and from the job site with ease and safety.

Automatic Rewind Coiler comes out with higher coil production at lower cost, greater production flexibility and increase extrusion speed up to 100% and reduce labor cost up to

Truck MounTed re-reeler allows dispensing of wire, cable and other flexible products in coils or on reels 36 inch diameter times 200 lbs. capacity! Provided with bearing

HD Powered Reel Rollers PRR13 has capacity of 13000lb unique custom design to fit into shipping containers and it is available for reel capacities to 20000lb.

Binder BH5-S comes with custom sized to fit your needs and it allows shaft to ride on roller bearings.

Semiautomatic coilers are a low cost alternative to fully automatic equipment. These coilers wind the product as it emerges from the extrusion line automatically following

Reelpower Industrial HD Mobile Jobsite Box is built with heavy duty for all steel construction which comes with push handles and angle iron & steel mesh construction

Semiautomatic coilers are a low cost alternative to fully automatic equipment. These coilers wind the product as it emerges from the extrusion line automatically following

P/N 14000-42 Our hose reel is designed for lighter weight material such as "tubing, hose and nylon cord or rope". The Manual hand crank is designed for easy winding and is

Optional cutter, can be directly mounted to our 3100 measurers, not recommended for steel wire, steel cable and fine wire. Blade can be remove to be sharpened.

Manual traverse Swing Arm for mounting a measurer. Replacement Swing Arm fits the following Reelpower machines WKT3 and WK3P/N 0207-919

1.0" CAM ROLLER WITH HEX SOCKET, normally fits onto WK3, WKT3, NK4 and CRS cable reel standsP/N 10915-23

1.75" CAM ROLLER WITH HEX SOCKETP/N 10915-22

p/n SP-RHMS120, Portable Powered Respooling machine

• Custom rail car container platform with three (3) HDCRS • Capacity for three reels, up to 72” diameter x 60” wide, 10,000 lbs. each • Reel stands

Standard Features• Heavy Duty Entry/Exit Guide Rollers• 4" Wide Belt, Maximum Material 5"• Configurable Line Pull up to 2,000 LBS• Pneumatic Open/Close/Clamp System• 48"

Manual Mobile Coiler with 3100M Measurer p/n 13650-317• 31” Turntable with 4 adjustable pins to hold coil in place. Center pin is for holding reels.• Turntable weight

Hydraulic Power Unit for Reel Lifting and Pintle Positioning System and Inverted Auto Traverse with Adjustable Roller Guide Box for Under Winding Features:Up to 6.50” PE or

Controlled power payoff- Model ILRSPI-005-001 • Custom Material Roller• Centralized Controls• AC Vector Brakemotor STANDARD FEATURES• AC Vector Powered Payoff•

Tough structural steel frame and front roller locks to ease reel removal. Side rollers are Included.Low base design to avoid damaging of cable inside reel. Rugged steel

The Reel Power Cable Reel Stand Combo is constructed of all tubular welded steel. Our stands are complete with a 2” diameter solid steel shaft, cam roller bearings that allow

Stand works in relationship with Reel Power manual coilers and can accomodate any of our 3100 Series Measurers ***NOT TO BE USED WITH 3101 or 3102

Standard Features2hp 120v Variable Speed DC Drive Operator Safety Footswitch Structural Steel Frame Bearing Mounted Reel Shaft 2” Diameter Reel Shaft 3” and 4” Arbor

The “Mini-Penthouse” is ideally suited for pulling material from reel racks, reel roller platforms or a pay-out cart. Also, ideal for use with an extrusion line when equipped

Low Tension No Contact Dancer The Low Tension No Contact Dancer is designed to protect delicate & sensitive product which may be damaged or over stressed by sheaves in other

Dual Shafted Tower Style Pay Off Model TSPO is a light weight, economical pay out machine that is ideal for 30-inch spools up to 15 inches wide and weighing 150 lb. or less. It

Single Shafted Tower Style Pay Off Model TSPO is a light weight, economical pay out machine that is ideal for 30-inch spools up to 15 inches wide and weighing 150 lb. It comes

Reel-O-Matic’s Special Model TUC5 is capable of supporting reels up to 60” O.D. x 48” wide x 5,000 lbs. Includes Multi Level Shaft Supports for various diameter reels,

Save warehouse space, improve internal logistics, and reduce shipping costs and product returns by producing coils of your HDPE, PP, PEX or PE-RT pipe products automatically from

Model WKT3-014 Mobile Shafted take-up machine for reels 20” to 54” diameter x up to 34” wide. Maximum lifting capacity of 3,000 lbs. and pull from a 2,500 lb. supply reel.

Model WKT3-014 Mobile Shafted take-up machine for reels 20” to 54” diameter x up to 34” wide. Maximum lifting capacity of 3,000 lbs. and pull from a 2,500 lb. supply reel.

The “Mini-Penthouse” is ideally suited for pulling material from reel racks, reel roller platforms or a pay-out cart. Also, ideal for use with an extrusion line when equipped

Includes Mini-Penthouse Standard Features and Options with the Additional Following Features: Integral Cutter for up to 2” Diameter Material Weighted Base for

Custom Designed for Plastic Pipe Underwinding

Includes Mini-Penthouse Standard Features and Options with the Additional Following Features: Integral Cutter for up to 2” Diameter Material Weighted Base for

Stationary Shaftless Take-up Machine with external torque control to automatically synchronize speed of take-up with speed of extrusion line, 0-20 FPM for reels 62” to 64”

Reelpower Industrial PRR Series was created for use in extrusion, assembly and inspection processes or where minimum floor space usage is required. The PRR may be easily loaded

The Benefits of Reel Power Semi-Automatic Pipe Coiling System: Reduce CostsOnly one operator is required to oversee the operation of two or more machines. Where coiler

Coiler can be removed to function as a small spool take-up. 8” ID X 12” OD Coils:Accommodates spool/ reel with 1/2” arbor holes 10” wide x 12” OD Comes with quick

Meter encoder standard programmed 100 PPR for 3100M, 1700, 1704, LT200, and LT400 measures. 12030-92 ENCODER, EIL580P-T$U4.5BF.01024.B/MT0204, Pre-Progammed to 100ppr, HTL output

Complete Kit Includes:Wheel Cover Side Shield (Lexan) Mounting Hardware

COMPLETE KIT INCLUDES:Wheel Cover Guard Mounting HardwareKIT WILL SERVICE:1700 1700 SP 1700 SL (Side load)

Stationary, Shaftless In-line Powered Pay-out machines for reels, 30” diameter x 11” to 18.750” wide x 2,000 lb. load capacity.

Reel Power Industrial’s custom ARC series single spindle film wrap coiler can be configured to work in-line. Corrugated coil will be film wrapped and auto ejected to customer

Leaders with (PCT) Pipe Coil Technology Innovations Standard Features:Wide range of coil head adjustment Safe and ergonomic operation Automatic pipe layering Automatic

Reduce Ovality and Achieve More Compact Coil Dimensions Low Ovality (LV) Technology was developed by and remains unique to Reel Power. It enables high density polyethylene pipe

Tilt table to handle panels or boxes 36” wide x 84” tall x up to 2,000 lbs. System will be a 120-volt single phase system.

Puller Specs:2” Wide x 12” and 20” Long traction belt length Speed Range: 200-750 ft/min Max (see below) Beam side plates anodized aluminum with Stainless Steel

Reel Power payouts are manufactured to meet your specifications and applications.

Reel Power payouts are manufactured to meet your specifications and applications. Features:Reel sizes up to 30” OD X 16” wide Up to 1,000 lb. capacity Variable

Features:6” OD (7 upper and 6 lower) groove sheaves (shown) Deep groove entry/exit sheaves and hinged plastic tubing retainer rollers Adjustable 1lb weights for added

Custom Adaptors for existing Combo Units for mounting a single compartment paralleling reel. Includes heavy duty drop-in racket with fixed 2” dia. stub shaft and reel 2 1/8”

Custom Adaptors for existing Combo Units for mounting a single compartment paralleling reel. Includes heavy duty drop-in racket with fixed 2” dia. stub shaft and reel 2

The Reel Power combo is constructed of all tubular welded steel. Our stands are complete with a 2” diameter solid steel shaft, cam roller bearings that allow for easy reel

The Reel Power combo is constructed of all tubular welded steel. Our stands are complete with a 2” diameter solid steel shaft, am roller bearings that allow for easy reel

The Reel Power combo is constructed of all tubular welded steel. Our stands are complete with a 2” diameter solid steel shaft, cam roller bearings that allow for easy reel

The Reel Power combo is constructed of all tubular welded steel. Our stands are complete with a 2” diameter solid steel shaft, cam roller bearings that allow for easy reel

Puller Specs:2” Wide x 12” and 20” Long traction belt length Speed Range: 200-725 ft/min Max (see gearbox ratios below) Gear Ratio (see below) Beam side plates

SPOOL WINDER: Manual Reel/Spool Take-Up & Pay-Off Features:16” tall and 27” overall in width. The 16” stand can be mounted to work any station Handles up to 16”

Fully Automated Pex Pipe Coiler with Stretch Wrap Features:Accumulator Dancer Comes with Conveying System Master Reel Payoff Automatic Pipe Cutter Speeds up to 650 FPM

Features:Robust coiler take-up, modified to accommodate up to 5.18” OD hose. Coiling head ID is manually adjustable via hydraulic motor controlled throughout its

Features:Deep pan turntable. Turntable modified to accommodate up to 300 feet of 5.18” hose. All steel welded main frame. Mainframe stand complete with bolt down floor

Heavy Duty Chain Cutter - Chain Cutting on Shop Floor Includes:Electric hydraulic chain cutter. Wheels or skid mounted versions. Push handle and locking wheels.

Horizontal Guide Roller Assembly 

Copper Tubing, Stainless Tubing, Aluminum Tubing, and More. Features:A-B 15HP AC Vector Variable speed drive 480 Volt, 3 Phase, 0-145 RPM. NOTE: Drive line engineered to halt