Search results for: 'rack reel with meter counter'

3101 MEASURER 1 inch Measurer For material 1/8” to 1” diameter +/- 1/2% accuracy Features:Feet and inch counter with reset to zero with turn of knob. Accommodate from

3101 Measurer - 2 inch Measurer for material 3/16” to 2” diameter +/- 1/2% accuracy Features:Feet and inch counter with reset to zero with turn of knob. Accommodate from

Stainless Steel Measurer for Small Material Standard Features: Wire Measurer accommodates a wide variety of flexible materials from 1/64” (.4mm) to 7/8” (22mm)

The ReelPower’s 1700 series measurers are designed durable, easy to use, and highly accurate. Spring tension pinch roll design provides constant pressure on the material

Measuring systems are offered in a wide range of configurations that include mechanical counters, electronic display counters, and programmable and integrated PLC devices for

The Reelpower Industrial model 1706 measurer is designed to measure heavy and large diameter cable such as wire rope and larger power cable. The pivot arms and springs keep the

Reelpower Industrial  Model 1704 measurer is designed to measure heavy and large diameter material such as Wire Rope and large diameter Cable. The pivot arms and springs keep

The “Mini-Penthouse” is ideally suited for pulling material from reel racks, reel roller platforms or a pay-out cart. Also, ideal for use with an extrusion line when equipped

Reelpower Industrial Re-Reeving machinery provides tension controlled pay-out and re-spooling for boom hoist and main lift line applications. The Re-Reeving series is available

For increased productivity, this machine allows the operator to load or unload finished Take-up reels while unit continues its re-spooling functions. The Dual Shafted High Speed

Recommended for use with paying out material from supply reels. The HJP can improve the efficiency of your reel and cable handling operation. By utilizing a hydraulic jack

Fast, Efficient and Economical - PMAC “SAVES ENERGY” OUR NEW RD-10 PMSM - PERMANENT MAGNET SYNCHRONOS AC MOTOR DELIVERS• Smoother acceleration and deceleration - “no

Reel drive take-up speed: 0-70 RPM variable (standard) Hand held pendant controls Independent arm movement standard

Recommended for use with paying out material from supply reels. The HJP can improve the efficiency of your reel and cable handling operation. By utilizing a hydraulic jack

The WKT Series Spooling and Coiling equipment is perfect for light to moderate duty applications.Take-ups are standard with a 1 3/8” O.D. shaft with bushings for 2”, 2

The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2” diameter solid steel shaft, cam roller bearings that allow for

Portable WKP Pay-out Machine has a heavy duty structural steel mobile frame design which comes standard with casters and floor locks for ease of maneuverability and stability

HJ/K series mobile reeling and coiling machine is a practical and economical solution for large diameter spooling and coiling applications. The HJ/K can improve the efficiency of

Reel Capacity: 48” dia. x 32” wide x 2,000 lbs.Portable pay-out stands have five (5) reel loading positions for various sized pay-out reels. The operator uses his/her

Integral Hydraulic Push Button Cutter Manual Shaftless Feature Electronic Stop to Length Counter Paralleling Guide Box Safety Guards Collapsible Coiler (Steel or

Integral Hydraulic Push Button Cutter Manual Shaftless Feature Electronic Stop to Length Counter Paralleling Guide Box Safety Guards Collapsible Coiler (Steel or

BRT series is provided with a standard forklift tube base for ease of transporting to the site where it is needed. Bolt-down flanges and a removable 1 3/8” center stub

Heavy Duty Floor Mounted Shaftless Pay-Outs provide you with increased productivity, reduced processing time and fast, easy supply reel change-outs.

The ReelPower Industrial  Model 1700 material length measurer offers increased accuracy, durability and operator convenience. The ROM 1700 has a measuring head that literally

The ReelPower Industrial 1700 series measurers are designed durable, easy to use, and highly accurate. Spring tension pinch roll design provides constant pressure on the material

Standard FeaturesLT 200 Series 1/64" to 2" Diameter material LT 400 Series 1/8" to 4" Diameter material Adjustable entrance & exit guide rollers - both

Reelpower Industrial Heavy Duty Cable Reel Stands are designed to last, featuring a forklift base to move them around with. Reelpower WC offers a complete line of standard,

Allows you to lift and flip your reel over from a rolling to a non-rolling position. The Reel Thing has been laboratory tested with ASME code stamped on each toggle bar making it

1 Hp 0-70 RPM 120 VAC StandardOptional 2 Hp and 3 Hp variable speed drives available; 0-70 or 0-35 RPM 230 VAC single phase Standard Specifications:1 HP SCR variable speed

TAKE -UPRST3N 30” to 60” dia., 34” wide X 3,000 lbs. RST4N 30” to 60” dia., 36” wide X 4,000 lbs. RST5 36” to 72” dia., 45” wide X 5,000 lbs.

RSP 20” to 48” dia., 36” wide X 2,500 lbs.RSP3N 20” to 54” dia., 54” wide X 3,000 lbs. RSP4N 30” to 60” dia., 38” wide X 4,000 lbs. RSP5 38” to 72”

Standard FeaturesHD Frame with Bolt Down Tabs Variable Speed SCR Drive System 10” Dia. UHMW Guide Sheaves Manual Hydraulic Lift Jack

Reelpowerwc MRTU Cantilevered Shaft Reeling and Coiling Take Up M/C is well known for its high utility and it comes with hassle free operations, durability and sturdy

Mobile Reel Rack Cart(REELRACK-61) : Reelpower Industrial “Mobile” Reel Rack Cart is manufactured with 3” Structural Steel to withstand many years of use.

Shafted and Shaftless Machines for Torque Synchronization. Manufactured to your specifications and Needs. Great for Extrusion/Pultrusion Applications.

Tough Structural Steel Frame and Front Roller Locks to Ease Reel Removal. Side Rollers are included. Low Base Design to Avoid Damaging of Cable Inside Reel. Rugged Steel :Angle"

"L" Series Cable Drum Jacks : These Hydraulic Cable Drum Jacks are indispensable for a properly equipped cable depot. Adjustable Shaft Saddle: Shaft saddles may be set for a

Reel Jacks - Simplex Mechanical Jacks: Reelpower Industrial Heavy Duty Simplex Jacks are designed with rugged use in mind. Exclusively distributed by Reelpower Industrial, these

Reelpower Industrial Heavy Duty Screw Type Reel Jacks are designed with rugged use in mind. Simply turn the handle and raise the saddle to the desired payoff height.

Reelpower Industrial Forklift Reel Loader Transports Reels Quicker, Easier and Safer.

Reel Upender (“Flipper”) Reel machinery for safely and efficiently “Flipping” your Reels back and Forth from Horizontal to Vertical Axis.

Shown Below is our Model SP-CRS108 Powered Cable Reel Stand for reels 108"Dia x 80" wide x 25,000lbs load capacity. This machine was designed for retracting cords in a Marine

For pulling material from Pay-out equipment, or for in-process applications such as extruders. drawing lines, stranding lines, printers and automatic cut-to-length braiders.

Reelpower Industrial PRR Series was created for use in extrusion, assembly and inspection processes or where minimum floor space usage is required. The PRR may be easily loaded

Reelpower Industrial SP RR35 Powered Re-Reeving Machine is deal for reels upto 125” Diameter x 102” Wide x 35,000 lbs.

Power sources, such as gasoline or diesel engines, when incorporated in our custom trailer allow you to deliver the trailer to your location. The trailer may then be used as an

The Center Hanging Package for Master/Supply Reels will provide easy loading and safe storage for weight capacities up to 5,000 Lbs. per level.

The Front Frame Hanging Package for Lighter Duty Master/Supply Reels for a more economical method of being able to pull material from several lighter duty reels.

ReelPower Industrial Standard Duty Coil Rack Package is great for putting up variable diameter and widths of coils for providing better efficiency with your valuable space and

Reelpower Industrial Cantilever Coil Rack Package is great for putting up variable diameter and widths of coils for providing better efficiency with your valuable space and making

Reelpower Industrial Elbow Rack Package is great for storing variable sizes and lengths of your elbows of any form for providing better efficiency with your valuable space and

Reelpower Industrial Conduit Racking for storing bundles of conduit or singles in a ready-to-pull application which is quick and easy. No more pulling from bundles on the floor.

ReelPower Industrial Track & Trolley Cable Reel System for reel storage and for paralleling operations is built to last. ReelPower Industria is committed to improving your

The Standard Duty Track & Trolley Package for Master/Supply Reels is great for doubling upon your reels and providing better efficiency by making the most of your valuable

ReelPower Industrial Special Model TUC5 is capable of supporting reels up to 60" O.D. X 48" wide x 5,000 lbs. Includes Multi Level Shaft Supports for various diameter reels,

Stationary Reeling and Coiling Machinery Standard Reel Capacities: TAKE-UP RST3N 30” to 60” dia., 34” wide X 3,000 lbs.RST4N 30” to 60” dia., 36” wide X 4,000

Allows you to lift and flip your reel over from a rolling to a non-rolling position. The Reel Thing has been laboratory tested with ASME code stamped on each toggle bar making it

Allows you to lift and flip your reel over from a rolling to a non-rolling position. The Reel Thing has been laboratory tested with ASME code stamped on each toggle bar making it

***PLEASE NOTE requires 4 1/2” - 6" arbor holes*** Allows you to lift and flip your reel over from a rolling to a non-rolling position. The Reel Thing has been laboratory

Reelpower Industrial Forklift Reel Loader Transports Reels Quicker, Easier and Safer.

Reelpower Industrial Forklift Reel Loader Transports Reels Quicker, Easier and Safer.

Available in three sizes: RL 75 - for 7,500 LBS Reels

Reelpower Industrial calibrated and certified Linear measurement Testing Cables give you peace of mind and keep your customers happy with a quick and easy way to make sure that

ReelPower Industrial calibrated and certified Linear measurement Testing Cables give you peace of mind and keep your customers happy with a quick and easy way to make sure that

Standard Features: Needing to replace the top wheel on a 3100. The urethane coated top wheel will fit into Reel Power's 3100 Wire Measurer P/N 13675-324

Custom Adaptors for existing Combo Units for mounting a single compartment paralleling reel. Includes heavy duty drop-in bracket with fixed 2” dia. stub shaft

The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for

The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solidsteel shaft, cam roller bearings that allow for easy

The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for

The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for

The Reelpower WC Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for easy reel

The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for

The Reelpower WC Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for easy reel

The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for

The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for

The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for

The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for

The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for easy

The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for

The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for

The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for

The powered reel stand can handle up to 48” diameter reels by 32” wide and 5,000 lbs. (CRS-48-079-001) 2” Shaft, 0-70 RPM, 1 Hp, 120 VAC, 1 Phase with Caster, Forklift Base.

Shown Below is our Model SP-CRS108 Powered Cable Reel Stand for reels 108"Dia x 80" wide x 25,000lbs load capacity. This machine was designed for retracting cords in a Marine

The Reelpower Industrial Combo is constructed of all tubular welded steel. Our stands are complete with a 2" diameter solid steel shaft, cam roller bearings that allow for

Tough Structural Steel Frame and Front Roller Locks to Ease Reel Removal. Side Rollers are Included. Low Base Design to Avoid Damaging of Cable Inside Reel. Rugged Steel

Tough Structural Steel Frame and Front Roller Locks to Ease Reel Removal.Side Rollers are Included. Low Base Design to Avoid Damaging of Cable  Inside Reel. Rugged Steel

Tough Structural Steel Frame and Front Roller Locks to Ease Reel Removal. Side Rollers are Included. Low Base Design to Avoid Damaging of Cable Inside Reel. Rugged Steel

Custom Adaptors for existing Combo Units for mounting a single compartment paralleling reel. Includes heavy duty drop-in bracket with fixed 2” dia. stub shaft

Tough Structural Steel Frame and Front Roller Locks to Ease Reel Removal. Side Rollers are Included. Low Base Design to Avoid Damaging of Cable Inside Reel.Rugged Steel

Tough Structural Steel Frame and Front Roller Locks to Ease Reel Removal. Side Rollers are Included. Low Base Design to Avoid Damaging of Cable Inside Reel. Rugged Steel

Custom-Designed, Automated Manufacturing Equipment for Processing Flexible Materials Standard FeaturesTakeup - 3 HP A/C Vector Variable Speed Drive Automatic 15mm Amacoil

A wide range of coiling equipment is available for winding material onto reels/ spools or onto coils (stretch wrapped or banded). Both on and off-line coilers are

Traversing Reel Take-ups and Payoffs are some of the most advanced on the market today. The units traverse the entire reel in front of the material line, creating an optimum layer

ReelPower Walk Through Shaftless Pay-Out are some of the most advanced on the market today,now it has some advanced features with 15,000 lb. capacity shaftless pay-Out.

Reel transport and payoff has doubles as a high capacity payoff system with options including a 16" Bronze Ventilated Disc or electromagnetic tension brake system and powered

Automatic Dual Reel Take Up systems offers high speed material processing and durability for long operational life.

Traversing Reel Take-ups and Payoffs are some of the most advanced on the market today. The units traverse the entire reel in front of the material line, creating an optimum layer

The DHSC is a complete dual head spooler/coiler designed for continuous production. When one spool is running the operator can be unloading the full spool and loading an empty

Pintle Arm (Cantilevered) Shaftless Take-ups and Payoffs are built tough, for years of trouble-free material processing. Standard sizes are available for reels from 28 in. (711mm)

These units are offered in capacities from 5,000 to 20,000 lbs. with reel sizes ranging up to 120" diameter. Drive options are Hydraulic, AC or SCR DC.

The High Speed Take-ups and Payoffs meet the demand for faster speed, wire and cable manufacturing and rewind. The heavy duty fixed pintle design allows processing speeds up to

PSTU and PSPO's are offered in capacities from 1,000 to 3,000 lbs. with reel sizes up to 60" in diameter. Drive options are AC, Mechanical and SCR.

Reel changes don't have to mean lost productivity. Now you can run continuous production lines and control your Payouts and Take-ups with horizontal and vertical accumulators from

The mobile measuring and coiling systems are ideally suited for coiling (or spooling) material from source reels mounted on a reel rack, roller platform or payout cart.

ReelPower Industrial Cable  new line of Automatic Dual Reel Take-Up systems offers high-speed material processing and durability for long operational life.

Multi-compartment reels allow paralleling of cables onto a master reel.

These units are offered in capacities from 5,000 to 20,000 lbs. with reel sizes up to 120" in diameter.

The "RPO" series rotating cradle style payoffs are designed to neutralize back twisting in cabling lines. These systems work in conjunction with downstream pulling equipment such

Reel Power Industrial has a wealth of experience with drives and controls - ranging from hydraulics, pneumatics, SCR DC, AC Vector to PC and PLC based control technology and their

Reel Power Industrial has a wealth of experience with drives and controls - ranging from hydraulics, pneumatics, SCR DC, AC Vector to PC and PLC based control technology and their

The Twinning & Quadding Equipment consist of on board capstan which pulls the wire at a constant speed to insure the proper lay length, and the tension take-up drive will

Reel Trailers are designed to support and transport a reel of cable to and from the job site with ease and safety.

Reel Transport Cradle easily load reel racking or auxiliary payout stands without damaging the wire.

Traversing column style take-ups and payoffs are some of the most advanced on the market today and offer capacities to 80,000 pounds. These units offer unique benefits as true

The Mobile Lift Carts are designed to handle of spools and reels, and transporting within a manufacturing facility easily.

Reelpower Industrial manufactured large steel and aluminium reels is available in torroidal steel, structural streel, aluminium steel and galavanized steel.

Truck MounTed re-reeler allows dispensing of wire, cable and other flexible products in coils or on reels 36 inch diameter times 200 lbs. capacity! Provided with bearing

HD Powered Reel Rollers PRR13 has capacity of 13000lb unique custom design to fit into shipping containers and it is available for reel capacities to 20000lb.

In-Line shaftless automatic take-up machinery manufactured to synchronize with your process. It also comes with custom reel capacities designed as per your specification.

Reel Trailers comes with standard gasoline engine which has load capacity of 14000lbs with 12 volt electric start.

Model HDHSTU & HDHSPO Series of take-ups and pay-offs were developed for higher take-up and pay-off speed applications. A robust and compact design allows for minimum floor

Extra Wide Gantry Takeups and Payoffs is one the outstanding product which comes with zero fleeting angle in your Line and also comes with extra wide telescoping frame to fit

BRT series is provided with a standard forklift tube base for ease of transporting to the site where it is needed. Bolt-down flanges and a removable 1 3/8” center stub

BRT series is provided with a standard forklift tube base for ease of transporting to the site where it is needed. Bolt-down flanges and a removable 1 3/8” center stub

BRT series is provided with a standard forklift tube base for ease of transporting to the site where it is needed. Bolt-down flanges and a removable 1 3/8” center stub

BRT series is provided with a standard forklift tube base for ease of transporting to the site where it is needed. Bolt-down flanges and a removable 1 3/8” center stub

BRT series is provided with a standard forklift tube base for ease of transporting to the site where it is needed. Bolt-down flanges and a removable 1 3/8” center stub

The Mobile Reel Transporter allows empty or loaded reels/drums to be picked up and maneuvered with ease to predetermined locations. The electric tug is designed to transfer a

Small Cable Reel Racks - Starter Kit 1 with product number CR4824096, I4500, Axle348 and comes in respective quantity 2,3 and 3.

Small Cable Reel Racks - Starter Kit 2 with product number CR4836096, I4500, Axle348 and comes in respective quantity 2,3 and 3.

Small Cable Reel Racks - Starter Kit 3 with product number CR4836120, I4500, Axle348 and comes in respective quantity 2,3 and 4.

Small Cable Reel Racks - Accessory Kit 1 with product number CR4824096A, I4500, Axle348 and comes in respective quantity 1,3 and 3.

Small Cable Reel Racks - Accessory Kit 2 with product number CR4836096A, I4500, Axle348 and comes in respective quantity 1,3 and 3.

Small Cable Reel Racks - Accessory Kit 3 with product number CR4836120A, I4500, Axle348 and comes in respective quantity 1,3 and 4.

P/N 14000-42 Our hose reel is designed for lighter weight material such as "tubing, hose and nylon cord or rope". The Manual hand crank is designed for easy winding and is

Single Reel Loader & Transport Cradle P/N 0212-020 easily loads reel racking or auxiliary payout stands without damaging the wire.

4 Reel Stackable Cradle, p/n 0212-001 is custom designed to fit your application needs and it has cradles which are made to be moved by forklift. It has standard sizes for 5,000lb

Screw Type Reel Jacks RJ2656 p/n 14988 are designed with rugged use in mind. Simply turn the handle and raise the saddle to the desired payoff height. Reelpower suggests that

Screw Type Reel Jacks RJ4696 p/n 14990 are designed with rugged use in mind. Simply turn the handle and raise the saddle to the desired payoff height. Reelpower suggests that

Screw Type Reel Jacks RJ5890 p/n 14985 are designed with rugged use in mind. Simply turn the handle and raise the saddle to the desired payoff height. Reelpower suggests that

Reel Power’s line of support equipment for Annealing Line Applications can be custom tailored to accommodate the clients exacting needs

Brass ejection nut for Reelpower's RD 5 and RD10 P/N 2102-352

Replacement Veeder Root Metric counter for 1700 or 1704 series measurers, for Right Hand Pay Out RHPO, 166946-045

Replacement Veeder Root Metric counter for 1700 or 1704 series measurers, for Left Hand Take up LHTU, 166936-055

Replacement Veeder Root Foot and Inches counter for 1700 or 1704 series measurers, for Left Hand Take up LHTU, 166936-054

Replacement Veeder Root Foot and Inches counter for 1700 or 1704 series measurers, for Right Hand Pay Out RHPO, 166946-044P/N 13700-47

ReelPower Industrial “Mobile” Reel Rack Cart is manufactured with 3" Structural Steel to withstand many years of use. Components include upright frames, crossbeams,

ReelPower Industrial “Mobile” Reel Rack Cart is manufactured with 3" Structural Steel to withstand many years of use. Components include upright frames, crossbeams,

Step Bushing (cast material) designed to slide over a 1.38" Shaft and aligning with Reel Arbor holes of 2", 2.5", AND 3" OD, generally works with Reelpower WK3, WKT3, WKP and NK

Reel Skate is designed to move fully loaded reels or spools on their flanges. The Reel Skate can handle reel flanges up to 5" wide and weights of 40,000 lbsP/N 0202-200

1.0" CAM ROLLER WITH HEX SOCKET, normally fits onto WK3, WKT3, NK4 and CRS cable reel standsP/N 10915-23

• Custom rail car container platform with three (3) HDCRS • Capacity for three reels, up to 72” diameter x 60” wide, 10,000 lbs. each • Reel stands

• With 3/4” diameter machine cold roll steel, plug in style-payoff & takeup shafts • Digital stop-to-length 3100 counter with 1/64”-7/8” OD capabilities, dual

Self-contained diesel, gasoline,and propane powered hydraulic drive systems designed to handle your applicationManual holding brake, Centralized control station, Powered

Bobbin Spooler System - 3500 FPMNEW DESIGN!Fully automated patent pending split style flooding adjustable coiling head holdsstem pack in place to reduce changeover

Payoff Tabletop Turntables for Coils & Reels Includes: • Tabletop Stand • Adjustable ID Pins • Center Post Model 6185 #14000-37 24” Diameter Turntable Bolt-down

Designed to solve “light tension” profile winding challenges Extensive diagnostics make troubleshooting and failure predictions simpler Precision winding patterns,

Standard Paralleling Reel Stands:Custom sizes are availableCRS48 48" dia × 32" wide × 5,000 lbs. CRS60 60" dia × 36" wide × 5,000 lbs. CRS72 72" dia × 45" wide × 5,000

UAF and RR machinery custom manufactured to cover your application and specifications • Platform Forklift Base • Model TUAF-30-27 • Speed & torque control/AC vector reel

Manual Mobile Coiler with 3100M Measurer p/n 13650-317• 31” Turntable with 4 adjustable pins to hold coil in place. Center pin is for holding reels.• Turntable weight

1. The operator inserts an axle onto the reel with the proper reel adapter bushing.2. Tilt the cart onto the wheels and maneuver the unit forward into the reeluntil the reel axle

NK Series: Take-Up Reeling Machine and Coiling Machine comes with powered hydraulic control to raise and lower the reel automatically

CRS - Your Source For Unparalleled Paralleling Solutions STANDARD PARALLELING REEL STANDCustom sizes available:CRS48 48” dia. X 32” wide X 5,000 lbs.CRS60 60” dia. X 36”

Hydraulic Power Unit for Reel Lifting and Pintle Positioning System and Inverted Auto Traverse with Adjustable Roller Guide Box for Under Winding Features:Up to 6.50” PE or

SINGLE SHAFTED TAKE UP - LOW TENSION APPLICATIONS STANDARD FEATURES INCLUDE:Heavy gauge sheet metal cabinet 3 axis servo drive Spindle maximum weight (50lb) Precision

Controlled power payoff- Model ILRSPI-005-001 • Custom Material Roller• Centralized Controls• AC Vector Brakemotor STANDARD FEATURES• AC Vector Powered Payoff•

The Wire Guide will accommodate up to 1.75” Diameter material while maintaining material in the center of the measuring wheel.

Tough structural steel frame and front roller locks to ease reel removal. Side rollers are Included.Low base design to avoid damaging of cable inside reel. Rugged steel

MACHINE TRAVERSES ENTIRE REEL CREATING AN OPTIMUM LAYER AROUND PACKAGE FEATURES • Adjustable Width Material Guide Sheave • Processes Round, Flat, And Rectangular Products •

MACHINE TRAVERSES ENTIRE REEL CREATING AN OPTIMUM LAYER AROUND PACKAGE FEATURES • Adjustable Width Material Guide Sheave • Processes Round, Flat, And Rectangular Products •

SMALL MANUAL TURNTABLE FOR EASY PAYOFF SPECIFICATIONS • 31” turntable will support 250lbs either in reels or coils configuration. • The center of the turntable is 28”.

MSPO-Mobile Manual Shaftless PayoutSTANDARD FEATURES • 48” OD Reel Maximum • 18” OD Reel Minimum • 36” Reel Width Maximum • 2,000 lb Weight Maximum •

The Reel Power Cable Reel Stand Combo is constructed of all tubular welded steel. Our stands are complete with a 2” diameter solid steel shaft, cam roller bearings that allow

Stand works in relationship with Reel Power manual coilers and can accomodate any of our 3100 Series Measurers ***NOT TO BE USED WITH 3101 or 3102

Features:Built with solid square tubing designed for lasting durability 6 different positions for paying out material Material guides for controlling pay-out Fixed casters

CRS - Your Source For Unparalleled Paralleling Solutions Lead Time: 5–6 Weeks if Item Is Not in Stock  

Standard Features • The Reel-O-Matic® Model 1700 material length measurer offers increased accuracy, durability and operator convenience. • The ROM 1700 has a measuring head

For Flexible Material 1/8” to 2” Diameter +/- 1/2% Accuracy Standard Features The ReelPower’s 1700 series measurers are designed durable, easy to use, and highly accurate.

Standard Features2hp 120v Variable Speed DC Drive Operator Safety Footswitch Structural Steel Frame Bearing Mounted Reel Shaft 2” Diameter Reel Shaft 3” and 4” Arbor

Standard Featurers • Narrow frame profile • Fully maneuverable with smooth action casters • 2” steel axel to handle up to 5,000 lbs of material on a single MCRS •

The “Mini-Penthouse” is ideally suited for pulling material from reel racks, reel roller platforms or a pay-out cart. Also, ideal for use with an extrusion line when equipped

Large Reel Dolly (96” Flange x 119” Width) Includes • All steel welded construction. • Extra heavy-duty swivel lockable casters, bearing supported for added

ReelPower Heavy Duty Simplex Jack (Sold Individually) ReelPower's Heavy Duty Simplex Jack is designed for rugged, dependable performance. Exclusively distributed by ReelPower,

Dual Shafted Tower Style Pay Off Model TSPO is a light weight, economical pay out machine that is ideal for 30-inch spools up to 15 inches wide and weighing 150 lb. or less. It

Dual Shafted Tower Style Take up Model TSTU is a lightweight, economical yet sophisticated take up machine perfect for reeling product up to 1.5 in. width at rates up to 250

Single Shafted Tower Style Pay Off Model TSPO is a light weight, economical pay out machine that is ideal for 30-inch spools up to 15 inches wide and weighing 150 lb. It comes

Single Shafted Tower Style Take up Model TSTU is a lightweight, economical yet sophisticated take up machine perfect for reeling product up to 1.5 in. width at rates up to 250

Reel-O-Matic’s Special Model TUC5 is capable of supporting reels up to 60” O.D. x 48” wide x 5,000 lbs. Includes Multi Level Shaft Supports for various diameter reels,

Model WKT3-014 Mobile Shafted take-up machine for reels 20” to 54” diameter x up to 34” wide. Maximum lifting capacity of 3,000 lbs. and pull from a 2,500 lb. supply reel.

Basket Fillers are the answer in many cases to packing and shipping cable in an inexpensive, reusable container where speed and shipping costs are important. Baskets are also

Model WKT3-014 Mobile Shafted take-up machine for reels 20” to 54” diameter x up to 34” wide. Maximum lifting capacity of 3,000 lbs. and pull from a 2,500 lb. supply reel.

Model WKT3-014 Mobile Shafted take-up machine for reels 20” to 54” diameter x up to 34” wide. Maximum lifting capacity of 3,000 lbs. and pull from a 2,500 lb. supply reel.

The “Mini-Penthouse” is ideally suited for pulling material from reel racks, reel roller platforms or a pay-out cart. Also, ideal for use with an extrusion line when equipped

Accuracy of +/- 1/2 of 1% at speeds up to 2000 FPM• Capacity range of 1/8” OD minimum x up to 1” OD maximum• Heavy steel plate construction with hardened entrance and exit

Includes Mini-Penthouse Standard Features and Options with the Additional Following Features: Integral Cutter for up to 2” Diameter Material Weighted Base for

Stationary Shaftless Take-up Machine with external torque control to automatically synchronize speed of take-up with speed of extrusion line, 0-20 FPM for reels 62” to 64”

All standard duty turntables come equipped with 12” tall tabletop stands, adjustable ID pins, and a center post

All standard duty turntables come equipped with 12” tall tabletop stands, adjustable ID pins, and a center post

Reelpower Industrial PRR Series was created for use in extrusion, assembly and inspection processes or where minimum floor space usage is required. The PRR may be easily loaded

Shown below is our Model SP-CRS108 Powered Cable Reel Stand for reels 108” Dia. x 80” wide x 25,000 Lbs. load capacity. This machine was designed for retracting cords in a

Model WKT3-014 Mobile Shafted take-up machine for reels 20” to 54” diameter x up to 34” wide. Maximum lifting capacity of 3,000 lbs. and pull from a 2,500 lb. supply reel.

Model WKT3-014 Mobile Shafted take-up machine for reels 20” to 54” diameter x up to 34” wide. Maximum lifting capacity of 3,000 lbs. and pull from a 2,500 lb. supply reel.

Model WKT3-014 Mobile Shafted take-up machine for reels 20” to 54” diameter x up to 34” wide. Maximum lifting capacity of 3,000 lbs. and pull from a 2,500 lb. supply reel.

SPRS6-3 Position Shafted Payoff Accommodates reels 38” to 72” diameter and up to 45” wide

Stationary Shaftless Take-up Machine with external torque control to automatically synchronize speed of take-up with speed of extrusion line, 0-20 FPM for reels or coils 62” to

Heavy-Duty Meter Stand With Swing Arm And Weighted Base

Heavy-duty coiling machine for heavy materialGreat for scrap-coiling applications Featured for wire rope usage and bare wireThe model SP-HDHSS757 comes with 7.5 HP AC

The Benefits of Reel Power Semi-Automatic Pipe Coiling System: Reduce CostsOnly one operator is required to oversee the operation of two or more machines. Where coiler

Coiler can be removed to function as a small spool take-up. 8” ID X 12” OD Coils:Accommodates spool/ reel with 1/2” arbor holes 10” wide x 12” OD Comes with quick

Meter encoder standard programmed 100 PPR for 3100M, 1700, 1704, LT200, and LT400 measures. 12030-92 ENCODER, EIL580P-T$U4.5BF.01024.B/MT0204, Pre-Progammed to 100ppr, HTL output

The replacement cable for machines with electronic predetermined stop to length counter system (ESTL)Includes Connector 35’ Long. Cable Can Be Cut To Length In The

Floor Stand for coilers, turntables, and measurers. Stand works in relationship with Reel Power manual coilers, turntables, and can accommodate any of our 3100 Series Measurers.

Stationary, Shaftless In-line Powered Pay-out machines for reels, 30” diameter x 11” to 18.750” wide x 2,000 lb. load capacity.

For Coiling/ Re-spooling Corrugated Stainless Steel Gas Line Coils, Reels, Bands, Wraps, Ejects, Cuts, & Conveys FEATURES:Programmable recipe management Allen-Bradley

Powered Re-Reeving Machine: for reels up to 96” O.D. x 60” wide x 10,000 lbs. load capacity. FEATURES:96” Dia X 60” Wide X 10,000 lb. 3” SS Shaft 0-8 Rpm 100,000

Standard Meter Stand for 1700 Series FEATURES:Base is 32” x 32” Telescoping height from 30.25” min to 49” max

Ideal For Re-Reeving Cranes, Winches, Boom-Hoist, Steel Reel Applications That Require Heavy Duty Payoff Tension And Take-Up Rewind Capabilities With Large, Heavy

RT Series Dual Reel Transporter/ Payoff FEATURES:Capable Of Transporting Multiple Reels Up To 10,000 Lb. Capacity

Reel Power Industrial’s custom ARC series single spindle film wrap coiler can be configured to work in-line. Corrugated coil will be film wrapped and auto ejected to customer

Reduce Ovality and Achieve More Compact Coil Dimensions Low Ovality (LV) Technology was developed by and remains unique to Reel Power. It enables high density polyethylene pipe

4″ & 6″ Wide Belts with 30″ Traction Lengths NPS-STD Pullers are designed for optimal performance, at an attractive cost, with standard features that are optional on

4″ & 6″ Wide Belt with 30” & 40″ Traction Lengths Reel Power Series NPS-HD Pullers offer superior product tracking capabilities utilizing Multi-V drive pulleys.

2″ , 3″ , and 4″ (5.1 , 7.6 and 10.2 cm) Diameter Cut Capacity The Reel Power Series Rotary Knife Cutters offer On-Demand cutting for optimum cut versatility of extrudate

5″ Diameter Cut Capacity, 4.5″ x 7.5″ (11.4 x 19.0 cm) Maximum Profile Size The Reel Power Series NC-5 HD Cutter offers precision On-Demand cutting. Optimum versatility is

Precision continuous Servo cutters provide bestin-class features for CUT ENERGY, ACCURACY and REPEATABILITY! The Reel Power series high speed servo rotary knife cutters have many

The Micro-Puller/Cutter is currently unavailable.It has been replaced with the NPC-Mini Puller/Cutter. Reel Power has changed the industry standard for medical puller/cutters

6 Inch Cut Capacity The Reel Power Series Servo, Table-Equipped, Traveling Up Cut Saw provides optimum cutting of a wide range of extrudate. A 7″ color touch screen PLC control

Reel Power payouts are manufactured to meet your specifications and applications.

Reel Power payouts are manufactured to meet your specifications and applications. Features:Reel sizes up to 30” OD X 16” wide Up to 1,000 lb. capacity Variable

Standard Combo Paralleling Cable Reel Stand, includes a three compartment model RPR 35 measuring 40” O.D. x 16” I.D. x 32” wide. Includes 2” O.D. shaft with 2 1/8”

Custom Adaptors for existing Combo Units for mounting a single compartment paralleling reel. Includes heavy duty drop-in racket with fixed 2” dia. stub shaft and reel 2 1/8”

Custom Adaptors for existing Combo Units for mounting a single compartment paralleling reel. Includes heavy duty drop-in racket with fixed 2” dia. stub shaft and reel 2

The Reel Power combo is constructed of all tubular welded steel. Our stands are complete with a 2” diameter solid steel shaft, cam roller bearings that allow for easy reel

The Reel Power combo is constructed of all tubular welded steel. Our stands are complete with a 2” diameter solid steel shaft, am roller bearings that allow for easy reel

The Reel Power combo is constructed of all tubular welded steel. Our stands are complete with a 2” diameter solid steel shaft, cam roller bearings that allow for easy reel

The Reel Power combo is constructed of all tubular welded steel. Our stands are complete with a 2” diameter solid steel shaft, cam roller bearings that allow for easy reel

Automatic Cut to Length Machine - Developed specifically for measuring and cutting small wire rope, jacketed, or unjacketed. Standard Features:1 HP variable speed 120v single

Standard Features:48” Diameter Carry up to 5,000 lbs. 10” Mechanical Brake 1 3/8” Cenering Stub Shaft Heavy Duty Structural Steel Top Mobile Frame Safety

The “Reel Thing” is a multipurpose tool which allows the user to lift or flip the reel in the proper and safe working position. The “Reel Thing” allows the user more

Metric Replacement Tabulator for 3100m P/N 13650-317, 3100m P/N 10001078 with Urethane wheels and the Cordage Measurer P/N 14000-47.

Reel Power new style counter bracket which is designed to fit on the following measurers the 1700, 1700SP, 1700SL, 1704, 1704SL and 1706

Gantry Style Shaftless Take-up / Tire Drive Gantry Style Shaftless Take-up for reels measuring 60” to 96” OD X 36” to 60” wide X up to 30,000 lbs. maximum weight

SPOOL WINDER: Manual Reel/Spool Take-Up & Pay-Off Features:16” tall and 27” overall in width. The 16” stand can be mounted to work any station Handles up to 16”

For reels 20” to 54” diameter x up to 34” wide x 1,000 lb lifting capacity. Features:1 HP AC Vector Variable Speed Drive, 0-70 RPM, 480 Volt, 3 Phase with AC Vector

Fully Automated Pex Pipe Coiler with Stretch Wrap Features:Accumulator Dancer Comes with Conveying System Master Reel Payoff Automatic Pipe Cutter Speeds up to 650 FPM

NK4, NK5, NK6 MANUAL SHAFTLESS SERIES: Reeling and Coiling Take-Up Machine Features:7.5 to 20 HP Hydraulic Variable Speed Drive System... forward & reverse 4,000 - 6,000

Features:Deep pan turntable. Turntable modified to accommodate up to 300 feet of 5.18” hose. All steel welded main frame. Mainframe stand complete with bolt down floor

REEL RACK TROLLEY 2.00 IN DIAMETER P/N 1499-201

Standard Features: Needing to replace the Bottom wheel on a 3100. The urethane coated Bottom wheel will fit into Reel Power's 3100 Wire Measurer P/N 13675-324

Re-Reever with Slide Traversing System for reels up to 96” O.D. x 60” wide x 10,000 lbs. load capacity FEATURES:Heavy duty structural steel main frame construction with

REEL RACK FRONT FRAME AXLE HANGING BRACKET FOR 1.38 IN DIAMETER SHAFT

Model WKT3-014 Mobile Shafted take-up machine for reels 20” to 54” diameter x up to 34” wide. Maximum lifting capacity of 3,000 lbs. and pull from a 2,500 lb. supply reel.

Copper Tubing, Stainless Tubing, Aluminum Tubing, and More. Features:A-B 15HP AC Vector Variable speed drive 480 Volt, 3 Phase, 0-145 RPM. NOTE: Drive line engineered to halt

Reel Power Industrial Automatic Cat-A-Puller Belt Type Cut-to-Length machine with ESTL (electronic stop-to-length) with slowdown for materialsup to 2” OD – 1HP, 220VAC single

Ground traversing, heavy-duty reel handling for large-diameter industrial applications. Standard FeaturesHeavy duty construction with bolt-down floor

The BAR, WEAR PAD ACT-16-001 is a replacement wear pad bar designed for compatible ReelPower machinery. It provides a sacrificial wear surface to reduce metal-to-metal contact,